This is our flagship coil on plug kit. It will supply the demands of any hardcore user.
It has no external ignition amplifier so it allows a cleaner and neater installation while still providing the spark needed by the modern day, high demand, high output Evo user.
Using custom made coils, this setup will install very easily with minimal effort. It comes with the coils pre-fitted to the carbon plate so all you need to do is bolt it to the rocker cover via the supplied 2xM6 bolts.
Wiring is strongly recommended to use sequential fire with the full motorsport loom option. This has 4 signal wires, 2 power and a ring terminal for the ground. All wrapped in Raychem DR-25 heat shrink and potted boots for abrasion and liquid resistance.
Reliably tested to 2.4bar (35psi) boost on alternative fuels.
If you are looking at this kit you already know what it’s for and why you need it.
Other kits available on the market are more expensive, require modifications to the coil, coil spring or other. This is the simplest, most cost efficient, direct fit kit on the market.
Due to the modular nature of these coils you can easily fit OEM Nissan coil heads to our coil tubes should you wish to do so.
The benefits of using a coil on plug kit can be found not only in high hp applications but you will find that the engine will start cleaner, run smoother and idle far better than before.
Please look at the dyno graph within the images. It shows the power potential that an upgraded ignition system can offer on top of the increase in engine pickup speed, idle and partial throttle driving.
- Better cold/warm start
- Handles over 800hp
- Improve drivability
- Smoother idle
- Run more boost
- 1 coil per spark plug instead of 2 coils for all plugs
- More energy efficient spark
- Increase spark plug life
- Carbon Fibre mounting plate
- Stainless Steel hardware
- Tested before shipping
Key points of our kit:
- Raychem Spec 44 Wire 20AWG (Mil-Spec)
- Compatible with OEM Nissan R35 coil heads
- Raychem DR-25 Heat shrink
- Raychem Potted Boots
- 1 year replacement warranty on coils & loom
- Compatible with stock ECU & standalone ECU’S. However, strongly recommended to use with a standalone and direct fire.
Only logged in customers who have purchased this product may leave a review.