Description

This item is to replace the parking mirror found on top of the passenger side wing (left). It allows a smoother and more aesthetically pleasing profile of the front end of the vehicle once fitted.

Supplied with a M6 insert installed and M6 fastener.

Fitment: 2002-2007 Toyota Alphard/Vellfire 10 Series

Material: PA12 Nylon

Print Type: Multi Jet Fusion (dyed Black)

Tools required

Removal of mirror: Small plastic trim tool to remove the plastic cover of the mirror on the front face. 10mm socket & ratchet to remove the fastener.

Installation of blanking cover: Short 1/4″ ratchet with a flex head and a 4mm Allen key bit.

Instructions

Once the mirror is removed, place the blanking cap into the hole that’s now been left in the wing. The raised section locates securely into the hole. This stops the part from rotating once installed. You will see an open area at the top of the inner wing area. Place a towel or similar over the area as if this is left open you have a risk of dropping the fastener or tool down into the inner wing area and it’s hard to retrieve. Use the supplied M6 fastener to secure the part from below. Do not over tighten as you will risk pulling the insert out from the part.